• Predictable Efficiency -- Using worst-case design, our system is able to perform separation when a vessel separator cannot.
• "Carryover" -- is prevented because our system is designed for worst case and unexpected slugs are handled along with the uninterrupted gas flow.
• Ease of Installation -- Our TF separat- or/slug catcher system is shipped to you in prefitted modules. The field contractor only makes circumferential butt welds to fit the system together.
• Full Onstream Operation -- Our slug catchers are on-line while pigging or dumping and can be automated to any degree you wish.
• Short Lead Time -- We reduce the time required from purchase order to operation. Our delivery is normally less than one-third the time to get a large vessel-type separator.

• Planned Phase Addition -- Our designs allow your company to add more capacity as gas supply increases, with minimum lead time, minimal expense and
  no shutdown.
• Cost Effective -- We offer cost savings up to 50% over conventional large OD vessel and pipe collection pro grams. Particular savings are realized when ANSI B31.8 design is used.
• Large Volume Storage -- The large volume storage is accomplished by the most economical way known -- in-line pipe or storage pipes.
• Sludge Manifolds -- The sludge manifold can be cleaned with on-line maintenance while unit is in operation.
• Single Source Responsibility -- We can supply all structural, process and mechanical engineering for your separation installation.

More about Harp Type Slug Catchers

Harp Type Introduction

Anatomy

Features

The Subsea Slug Catcher

PDF of Slug Catcher Brochure